All this space in the main chamber means you can install an incredibly high-end custom liquid loop on every component with multiple radiators. GPU thickness isn't going to be a problem thanks to the 7000D's copious amounts of expansion slots, both vertically and horizontally. There's enough clearance in the 7000D for a graphics card up to 450mm in length and a CPU air cooler as tall as 190mm. The 7000D also supports 360mm, 420mm, and 480mm radiators, though not all of these can be installed at the same time, with three 360mm radiators being the maximum. All those vents are there to allow up to twelve 120mm fans to suck in and exhaust as much air as possible. Except for the side panel which is made of tempered glass, every side of the 7000D is covered in perforations and vents. It comes in either black or white and has three preinstalled 120mm fans as well as a fan hub that can support six fans in total. Corsair's 7000D Airflow is well-equipped to handle modern high-end components for $230, which isn't that high compared to how much high-end components cost these days.Īesthetically, the 7000D is extremely minimalistic and functional. $245 at Amazon $270 at Newegg $270 at Best Buyįull tower cases are becoming more and more appealing these days as AMD, Nvidia, and Intel keep launching newer processors with higher levels of power consumption than ever before. The 465X happens to be the most affordable of them all at about $140, and we highly recommend it for anyone who's looking to build a midrange PC. The Corsair iCUE 465X is a solid alternative to several other Corsair cases since many of them are essentially the same in size. You can also install the GPU vertically, but there's less clearance for thickness, which may pose a problem for modern high-end cards that take up three or more slots. This is basically enough for any high-end GPU or CPU air cooler. You can also install a GPU up to 300mm in length and a CPU air cooler up to 160mm in height. Radiator support is 360mm at the front, 240mm on the top, and 120mm in the back, which is technically worse than the 5000X RGB, but in practice even a high-end PC doesn't need anything more than a 360mm radiator for an AIO or custom liquid cooler. These fans can be controlled using the included iCUE Lighting Node Core fan hub, which conveniently supports up to six RGB fans. The iCUE 465X RGB also comes with three 120mm RGB fans preinstalled on the front panel (which leaves a large enough gap for good airflow), with room for two more fans on the top and one at the back. That's particularly nice for users wanting to make a custom cooling loop, but it'll also be useful for anyone who wants to install a higher-end AIO cooler. Radiator support is also great, with the potential to adding up to three 360mm radiators. In addition to the three 120mm fans at the front, there's room for three more at the top, another one in the back, and another three fans on the non-glass side panel. However, a glass front panel usually results in suboptimal airflow for the intake fans at the front, which could be a problem if you want to insert a lot of high-performance components.ĭespite that, the 5000X doesn't compromise on cooling. The 5000X provides the common and popular combination of tempered glass panels (on every side but the bottom and back) plus three RGB fans preinstalled in the front. This case comes in either black or white, but the white version is more of a combination of white and gray, unlike the black version, which is uniformly black. At about $200, it's definitely on the pricey side, but you get what you pay for, and the 5000X provides a great foundation for years of upgrading. $235 at Amazon $215 at Newegg $215 at Best BuyĬorsair has a very good selection of mid-tower cases and its iCUE 5000X RGB case ticks the most boxes for the kind of PC you'll want to keep upgrading for years.
0 Comments
Leave a Reply. |